Stock car with the new Andews trucks fitted on an almost level bit of track.

New Trucks Now Available

As part of our expanding product line, we are introducing 3 new trucks. To be used under previously announced kits, as with the Ingoldsby trucks for the Alamosa Trash Gondola, and future kits the Andrews trucks for a 5900 series Stock car.

Initially the trucks will be available Separately and only directly from ourselves.

riogrande@hotmail.co.uk

4’ 11” wheel base 40 ton Bettendorf trucks. As used under the Fish Belly Flats £33 per pair.

(Thanks to Mike Gray for producing the masters for this truck)

4’ 8” wheel base Andrews trucks. As used under the 5900 series stock cars before strengthening. £33 per pair.

Thanks to Mike Gray for producing the masters for this truck)

4’ 6” wheel base Ingoldsby Dump Car Trucks. Later used under the Alamosa Trash Gondola, also Conoco and TCX Tank cars.
£33 per pair.

Bearing Detail, all trucks will include ball bearings for improved running

An underside view of one the Bettendorf trucks

Parts for one truck included are all white metal castings, springs bearings and a short length of brass rod to hang the brake shoes. Not included are wheels, however we recommend Sierra valley 26" http://www.sierravalleyenterprises.com/index.html

Shipping UK £3, Europe £4, USA £6.50

June Update

Rio Grande Southern 259
Our latest release will be replacement sides for the AMS Jackson Sharp coaches, to produce the Rio Grande Southern Combination car 259. The kit will include laser cut replacement sides, metal steps and grab handles.
The model is shown here in red (information I have is conflicting as to whether it ever wore red or green paint.)
Water side decals will soon be available, as an optional extra, produced by Stan Cedarleaf.
These kits will be available initially in limited quanties from Jonathan at Electric Model Works by early to mid July.

Availability of other kits.
Due to a problem with shipping a number of parcels sent to Electric Model Works were lost. These missing kits should be back in stock from mid July and include:
010145 Water service car, 06402 Boom car add on kit, replacement sides for the AMS J&S cars to produce coaches 300 and 292.

The Gunnison plow and Alamosa trash Gondola are now close to production,
We have purchased our own white metal casting machine and it is my intention to produce castings for all the parts that are not available from Ozark.
80% of the masters for these are now complete, and the remainder should be ready in the next few weeks.

Pagosa Combine 215
Shown below is a preproduction model of the Pagosa springs Combine. The kit will include laser cut sides, cupola and roof walk. Together with cast ladders, smoke stack etc. The only part to be completed is the roof lantern, and this again should be ready in a few weeks. The Cupola is designed to be built over the existing AMS roof without any cutting. But should you wish to cut the roof to include interior detail it is easy to do so.

Replacement Jackson Sharp Sides

Our latest project is replacement sides for the AMS Jackson Sharpe Passenger Cars

300

Here are a couple of pictures, of the prototypes. They are designed to be direct replacements for the AMS sides, and screw in position just like the originals.

There are 2 designs to start with 300 with single pane windows, and 292 with round corner windows.

292

292 will also include a set of celestory strips. This lasered section of clerestory wall and window frames will allow the masking over of the original AMS 11 window recessed clerestory with an accurate 13 window clerestory .
292 will also come with parts to convert it to 0292 MOW car.

Future designs will hopefully include an RGS combine (259), and a couple of cars currently running on the Durango and Silverton.

As usual they are made from laser cut ply.

Both cars will have window frames which can be set in the open position

Pricing Should be finalized in the next couple of weeks.

D&RGW 06402 Tender for ditcher OX

Our next project will be a Tender/boom car to run with the Car Works Ditcher.
It will be available in two forms. As a complete kit or as an add on to an AMS flat car.

Price TBA
Available Spring 2008

Below are a couple of shots of the prototype model.

Update

Just a quick update on current progress.
The 06413 Wheel, Tie and rail add on kit is now ready.
Their will be two options. One for just the wood, water side decals, and four brass brackets for the side of the flat car. price £29.50 (ideal for those with easy access to detailing parts).
The Second option will include the above plus the nut and bolt castings required to complete the car. £36.00
Neither version will include the AMS flat or extra truck carried as a load.















We're putting the release of the trash Gon back a little bit. I'm not entirely happy with the trucks I had in mind. The hartford D&RGW 4' 6" Reefer Trucks seem a little to big to me, although Sloan’s book states the car had 4’ 6” trucks the pictures I have seem to show a smaller truck, so I'm going to do a little more research.

The Gunnison plow is making good progress, and will hopefully be available late Spring.

Again their will be two options, one with just the wood, brass plow, and decals. with a target price of £135 .

The Second option a full kit including the above plus white metal castings, and Accucraft trucks, with a target price of £225

Below is a Photo shop enhanced picture of the first model outdoors.